Container legs for shipping containers: fast and safe loading and unloading without heavy equipment

Container stands make it possible to position, set down, or store a shipping container long-term without the use of a crane, forklift, or sideloader. For transportation companies, logistics service providers, port operators, and construction firms that work with shipping containers on a daily basis, this translates to immediate savings on equipment, time, and operational costs. ContainerPro is the exclusive distributor of the ConFoot system for the Netherlands, Belgium, Germany, Austria, France, and Switzerland—making it the specialist for professional container stands in the Benelux and much of Europe.

What are container legs?

Container legs—also known as container supports or container support legs—are portable, adjustable supports that are secured into the ISO corner castings of a shipping container. Once the legs are in place, the trailer or chassis can be lowered using the air suspension, and the chassis can be driven away while the container remains stable and secure on the legs. When picking up the container, the process is reversed: the trailer drives back under the container, the chassis is raised using the air suspension, the legs are removed, and the container is immediately ready for transport.

The principle is simple, but the operational impact is significant. Whereas traditional container handling relies on heavy and expensive equipment—such as a crane, a reach stacker, or a sideloader—container legs offer an autonomous, flexible, and safe alternative method that can be carried out by a single person.

ContainerPro supplies only professional container legs that are designed and tested for heavy-duty commercial use. The ConFoot system, ContainerPro’s flagship product, is compatible with all standard ISO shipping containers of any size.

 

Why use container stands?

No crane, forklift, or side loader required

The most immediate reason why organizations choose container stands is to eliminate costly and logistically complex dependencies. Renting a crane or side loader costs time and money—and isn’t always immediately available at the desired location. With container legs, you can place a shipping container at any location accessible by truck, without the need for additional equipment.

This is particularly valuable on construction sites, for temporary storage, in distribution centers with limited crane capacity, and at locations where heavy machinery simply cannot or is not allowed to go.

Working Safely with Just One Person

The ConFoot system is designed so that a single person can install and remove the container legs. The process takes an average of ten minutes. This means fewer staff are needed per container movement, less coordination, and a lower risk of errors or accidents that can arise from improvised solutions.

Safety is no afterthought in container handling. ContainerPro’s legs are designed and certified for professional use, with load capacities that match the weights of loaded shipping containers. The exact load capacities for each model are described below.

Time savings and cost savings

Every container movement that doesn’t require a crane or forklift results in savings. Add to that the fact that drivers spend less time waiting, planners are less dependent on external equipment scheduling, and the total turnaround time for a container placement is significantly reduced. For organizations that place and pick up containers daily or weekly, those savings add up quickly.

The ConFoot System: ContainerPro’s Container Leg

ContainerPro offers the ConFoot system in several versions, each designed for a specific application and type of trailer or chassis. Below is an overview of the available container legs.

ConFoot CF – Standard container leg for freestanding container storage

The ConFoot CF is the basic version of the system and is suitable for freestanding container placement. The trailer drives under the container, the air suspension is raised, and then the container legs are secured. The trailer is then lowered again using the air suspension so that the container rests on its legs, after which the trailer can be driven away. The CF set has a load capacity of 34 metric tons—suitable for fully loaded containers of all sizes.

ConFoot CFP – for loading and unloading containers at a loading dock

The ConFoot CFP set is the model specifically designed for situations where the container is positioned at a loading dock to be loaded or unloaded, or as long-term additional storage space. Both container doors can be fully opened while the container remains stable on the CFP set. The load capacity is 30 metric tons.

This version is particularly valuable for distribution centers, loading docks, and logistics hubs where containers are loaded and unloaded at loading docks.

ConFoot CFL – for loading and unloading, among other things, pallet-wide containers and non-ISO tank containers

The ConFoot CFL is designed for non-ISO tank containers with a frame and pallet-wide containers. Its load capacity is also 30 metric tons.

ConFoot CFU – for chassis without air suspension

The ConFoot CFU is designed for applications where containers need to be lowered from the chassis to the ground and vice versa, as well as for trailers without air suspension. This system operates mechanically and is therefore compatible with a wider range of chassis and transport configurations. The CFU’s lifting capacity is 20, 30, or 45 metric tons, depending on the configuration.

All ConFoot models are compatible with standard ISO corner castings and can therefore be used with all common shipping container sizes.

For which applications are container legs suitable?

Container legs are used in a wide range of industries and situations. The most common applications are:

Transportation and Logistics

Drivers can unload containers without waiting for a crane or forklift. The trailer is immediately available for the next trip. This increases the efficiency of the entire fleet and reduces downtime per vehicle.

Ports and Container Terminals

At sites where equipment is under heavy strain and turnaround times are critical, container legs offer a fast and autonomous method of operation that can supplement or replace heavy equipment.

Construction Sites

Shipping containers are used on construction sites as storage space, site offices, or temporary offices. With container legs, they can be set up and moved without needing to schedule a crane—even at locations with limited access.

Distribution centers and logistics hubs

The ConFoot CFP makes it possible to load and unload containers at a loading dock and to use them as temporary additional storage space. This increases the flexibility of logistics operations without requiring any changes to the infrastructure.

Shipping companies and rental companies

Organizations that rent out or move containers for third parties benefit from the ConFoot system’s quick and independent deployment.

Defense and Mobile Operations

At locations where heavy equipment is not available or not desired, container stands offer a compact and reliable solution for placing and removing container units.

Who uses ContainerPro container legs?

The primary target audience for container stands consists of businesses that regularly work with shipping containers and, in doing so, face challenges such as reliance on heavy equipment, time loss, or safety risks. Specifically, this includes:

• Container carriers and trucking companies
• Port Authorities and Container Terminals
• Distribution centers and logistics service providers
• Freight Forwarding Companies
• Construction Companies and Contractors
• Shipping Container Rental Companies
• Defense and government organizations with mobile storage needs

Container legs are not a consumer product. The ConFoot system is designed for professional, intensive use in business environments where reliability, safety, and operational efficiency are non-negotiable.

Why Choose ContainerPro as Your Container Leg Specialist?

ContainerPro is not a generic container supplier, but a specialized B2B partner offering solutions for working more efficiently with shipping containers. As the exclusive distributor of ConFoot for the Netherlands, Belgium, Germany, Austria, France, and Switzerland, ContainerPro has in-depth product knowledge, technical documentation, and direct access to the entire ConFoot product line.

What sets ContainerPro apart:

• Exclusive distribution of the ConFoot system in several European countries
• More than 10 years of experience in container handling solutions
• Technical Advice tailored to your specific situation, container type, and operation
• Complete product documentation and manuals available
• Direct contact with a specialist—no referrals to resellers or intermediaries
• Broad portfolio of complementary container solutions for handling, safety, securing, and access

ContainerPro operates on a consultative sales model: you won’t receive a standard price list, but rather personalized advice based on your operational situation. Request a demo or contact one of our specialists directly.